Written by Ronald van Loon, July 31, 1991 (IRCNICK : rvl) [ PART TWO : PUBLIC CONVERSATIONS, CHANNELS AND CHANNEL MODES ] Most of the information in this file can also be obtained by issuing: /HELP CHANNEL /HELP MODE and in the /HELP-files to the various commands. Recap ===== In part one, I talked about the basic commands used in IRC and how you could have a private conversation with someone. In the following I will assume you have read and understood Part One. If you don't, contact your local IRC-operator or server-administrator. Information on how you can find out who he/she is, can be found below. Definitions =========== IRC-ADMIN - Person who has access to all files concerning ircd (the server program). IRC-OPER - Person who has privileges given to him by an IRC-ADMIN - someone who tries to maintain a fast reliable IRC network. USER - Person who is using IRC. More basic commands =================== The following list of commands deal with servers and clients in general. Unless otherwise stated, all commands take an optional argument ; this argument specifies the server on which you want the command applied. ----- /LINKS Shows all of the servers currently connected to the irc network. If servername is specifed, LINKS shows any servers that match the given servername. The servername may contain wildcards. ----- Example : : /LINKS *.com IRC: *** *.Spies.COM : [wiretap.spies.com] :<--- on the OTHER side IRC: *** Spies.COM : <--- on YOUR side IRC: *** world.std.com : The World @ Software Tool & Die IRC: *** Firewall.Nielsen.Com : [138.108.101.10] :AC Nielsen, Bannockburn IL IRC: *** mips.mitek.com : OpenConnect Systems Server, Dallas, (2.6pre19.p1) ----- /ADMIN Displays the administrative details about a server. Usually this will give you an e-mail address you can use to ask questions. ----- Examples : : /ADMIN IRC: ### Administrative info about fysak.fys.ruu.nl IRC: ### Dept. of Physics and Astronomy IRC: ### Rijks Univeristeit Utrecht, the Netherlands IRC: ### Peter Mutsaers : /ADMIN world.std.com IRC: -world.std.com- ### Administrative info about world.std.com IRC: -world.std.com- ### The World @ Software Tool & Die IRC: -world.std.com- ### Brookline, MA, USA IRC: -world.std.com- ### Spike ------ /MOTD Gives the message-of-the-day for a server. ------ Example : : /MOTD world.std.com IRC: -world.std.com- MOTD - world.std.com Message of the Day - IRC: -world.std.com- MOTD - Be careful out there... IRC: -world.std.com- MOTD - IRC: -world.std.com- MOTD - ->Spike IRC: -world.std.com- * End of /MOTD command. ------- /USERS Displays the list of users currently logged in on the server's home-machine. ------ Examples : : /USERS IRC: UserID Terminal Host IRC: marjo ttyi0 prisma.cv.ruu.n IRC: rootb pty/ttys0 gandalf IRC: gash pty/ttys1 kameleon IRC: fred pty/ttys2 gandalf IRC: gash pty/ttys4 kameleon IRC: koen pty/ttys5 drogo IRC: marjo pty/ttys6 brutus IRC: fred ttyp1 gandalf:0.0 IRC: marjo ttyp2 brutus:0.0 ------ /TIME Displays the current (local) time on the servermachine. /DATE /DATE and /TIME are identical. ------ Examples : : /TIME IRC: *** prisma.cv.ruu.nl : Wednesday July 31 1991 -- 16:11 MET : /TIME *.au IRC: *** munagin.ee.mu.OZ.AU : Thursday August 1 1991 -- 00:12 EST (from *.AU) : /TIME *.jp IRC: *** utsun.s.u-tokyo.ac.jp : Wednesday July 31 1991 -- 23:12 JST (from IRC: utsun.s.u-tokyo.ac.jp) : /TIME *.edu IRC: *** polaris.ctr.columbia.edu : Wednesday July 31 1991 -- 10:13 EDT (from IRC: polaris.ctr.columbia.edu) ------ /LUSERS Gives a brief listing of the number of users, the number of servers and the number of operators. ------ Example : : /LUSERS IRC: *** There are 210 users on 123 servers IRC: *** 33 users have connection to the twilight zone ------- Public Conversations ==================== In IRC, there are a lot of places where you can 'hang out' - those places are called channels. You can compare conversations on a channel to a conversation among a group of people : you see/hear everything that is said, and you can reply to anything that's said. What you type is received by everyone who's willing to listen - and everyone who is late will not hear what is said before unless repeated by one of the ones who were there (who said 'real life'). But I digress. All channels on IRC have names. There are two type of channel names, numeric channel names (all digits) like 42, -40 and 666, and string-channel names, beginning with either a '+' or a '#' sign (explained below) followed by some kind of text-string, like '+C++' or '#COFFEE' or '+Motif_1.1.1'. Usually, the name of the channel will indicate the type of conversation that's going on in there. Don't count on it, though. Every channel has certain characteristics, called channel modes. These will also be explained below. First of all, recall the /NAMES and /LIST commands from Part One of this tutorial ; they will show you the names of existing channel. To join in the conversation on a certain channel you use the /JOIN command. ------ /JOIN Changes your current channel to the channel specified. /CHANNEL and /JOIN are identical. If the channel did not exist already, it will be created and you will be in charge of the new channel (Channeloperator). ------ I will know show you the example from tutorial Part One, as a public conversation on a channel. 1) : /NAMES 2) : /JOIN +demo 3) : Goodmorning 4) : Pretty good, even the weather's fine 5) : /WHOIS rvloon 6) : I have to get back to work, I'll drop by later 7) : /JOIN 0 The output on my screen : 1) Prv: * YourName rvloon 2) *** YourName has joined channel +demo 2) *** Users on +demo: @Yourname *** rvloon has joined channel +demo 3) > Goodmorning Morning, how is life ? 4) > Pretty good, even the weather's fine 5) *** rvloon is rvloon@131.211.145.35 (Ronald van Loon) on channel +demo 5) *** on irc via server prisma.cv.ruu.nl (The CV stand-alone IRC-server) 5) *** Command last received: 32 :is the idle time for this user do you have time for some coffee ? 6) > I have to get back to work, I'll drop by later 7) *** YourName has left channel +demo The output on rvloon's screen : *** rvloon has joined channel +demo 3) Goodmorning > Morning, how is life ? 4) Pretty good, even the weather's fine > do you have time for some coffee ? 6) I have to get back to work, I'll drop by later 7) *** YourName has left channel +demo ------ It is also possible, when you are already on a channel, to ask someone to join your channel. The command is called /INVITE. ------ /INVITE [channel] Invites another user to a channel. If no channel is specified, your current channel is used. In that case, you have to be on a channel for this to work. ------ Examples : : /INVITE rvloon +test IRC: *** Inviting rvloon to channel +test On rvloon's screen the following text will appear : *** rvloon invites you to channel +test : /INVITE rvloon If you are on channel +demo : IRC: *** Inviting rvloon to channel +demo If you are not on any channels : IRC: *** You have not joined any channel ------ If you receive an /INVITE message, you have the following options if you want to join the channel you were invited to : ------ /JOIN -INVITE Join the channel to which you were last invited. ------ Or type /JOIN . Finally, there is a third flavor of the /JOIN command : ------ /JOIN -NICK Join the channel that the specified nickname is on. ------ If you issue a /JOIN command without any parameters, your current channel is displayed. You can leave a channel by : - issuing a /JOIN 0 (see explanation below) - issuing a /LEAVE Topics ====== Channels have topics, that indicate the current topic of conversation. You can change the topic on a channel with the /TOPIC command. ------ /TOPIC Changes the topic for your current channel. ------ Example : : /TOPIC testing IRC: *** rvloon has changed the topic to "testing" Types of Channels ================= There are different types of channels. I will discuss them all and list their various virtues. Limbo/NULL ---------- Channel 0 is the NULL channel, or "limbo" channel. This is the channel you are on by default. You can compare this channel to /dev/null on UNIX systems - everything said on this channel is lost. You enter this channel if you don't want to leave IRC, but also don't want to join in any conversation. Public ------ Channels between 1 and 999 (numeric) and "+"-channels are public by default - public means that everyone can see the channel in the /NAMES and /LIST lists. Public also means that everyone can join that particular channel. Private ------- Channels 1000 and up are private by default - private means that the channel is shown as "Prv" in the /NAMES and /LIST lists. People who don't know the name of the channel are not able to /JOIN. "+" channels can be made Private with the /MODE command - described below. Secret ------ Channels below 0 are secret channels - secret means that the channel will not show up in the /NAMES and /LIST lists at all. "+" channels can be made Secret with /MODE command - described below. People on secret channels are also not counted in /LUSERS, and not shown in /NAMES either. Additional channel flavors ========================== Channels can have additional constraints, which can be set by the /MODE command. To understand this, recall that the first person to /JOIN a channel effectively creates it and is initially "in charge" of the channel. (Channel operator). He can subsequently add those constraints, make other people channeloperator at leisure. Moderated --------- The only people who talk on a moderated channel, are channel operators. Useful for conferencing (the chairman is the one who will grant chanop-status for the current speaker). Other people can only listen. Limited ------- The number of people allowed to /JOIN the channel is limited to a certain number of people. Topic Limited ------------- The only people allowd to change the topic on a channel are chanops. Invite only ----------- People can only join your channel if they're /INVITEd by someone on your channel. Message Disabled ---------------- People cannot send messages to your channel with the /MSG command. Most of the above modes can be combined. Changing channel modes ====================== If you are a channeloperator, you can change the status of the channel with the /MODE command. The syntax of /MODE is : /MODE + Add constraints to channel /MODE - Remove constraints from channel You have to be channeloperator on for this to work. can be one of the following : m - make channel moderated s - make channel secret p - make channel private l - make channel limited, where is the maximum number of users allowed t - make channel topic limited o - Makes a channel operator i - channel is invite only n - No MSGs to the channel are allowed (Message disabled) ------ Example : : /MODE +demo +p IRC: *** Mode change "+p " on channel +demo by rvloon This will make channel +demo private. : /MODE +demo +l 10 This will limit the +demo channel to maximum 10 people at the same time. [ END OF PART TWO ; PART THREE WILL DEAL WITH VARIABLE SETTINGS IN IRCII ]